User Manual

Chapter 4 - Operation and Administration Using the CLI Managing BSs
4Motion 724 System Manual
npu# show mngmnt-alrmthrshld bs
4.8.27 Managing ID-IP Mapping Parameters
After enabling the BS configuration mode, you can execute the following tasks:
 Configure one or more ID-IP Mapping entry (refer to Section 4.8.27.1).
 Delete one or more ID-IP Mapping entries (refer to Section 4.8.27.2).
Command
Syntax
npu# show mngmnt-alrmthrshld bs [<(1 to 16777215 StepSize 1)
Privilege
Level
1
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<(1 to 16777215
StepSize 1)>
The BS ID
Specify a value for this
parameter if you want to
display Management Alarm
Thresholds parameters of a
specific BS. Do not specify a
value for this parameter if you
want to display Management
Alarm Thresholds parameters
of all BSs.
Optional N/A 1-16777215
Display
Format
(for each
existing BS
if requested
for all BSs)
BSIDLSB :<value>
ControlMessagesRetransmissionRateThreshold(%) :<value>
ControlMessagesDropRateThreshold(%) :<value>
Command
Modes
Global command mode