User Manual

Chapter 4 - Operation and Administration Using the CLI Managing BSs
4Motion 743 System Manual
4.8.28.5.2 Displaying Configuration Information for Ranging Bandwidth Request
Parameters
To display configuration for the Ranging Bandwidth Request parameters, run the
following command:
npu# show ranging-bwreq bs [<(1 to 16777215 StepSize 1)
Specify the BS ID if you want to display configuration for a particular BS. For
example, to display the Ranging Bandwidth Request parameters of BS 66053, run
the following command:
npu# show ranging-bwreq bs 66053
Do not specify this parameter if you want to view configuration information for all
existing BSs. To display information for all BSs, run the following command:
npu# show ranging-bwreq bs
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<(1 to 16777215
StepSize 1)>
The BS ID
Specify a value for this
parameter if you want to
display the Ranging General
parameters of a specific BS.
Do not specify a value for this
parameter if you want to
display the Ranging General
parameters of all BSs.
Optional N/A 1-16777215
Display
Format
(for each
existing BS
if requested
for all BSs)
BSIDLSB :<value>
StartofRangingCodes :<value>
Contention-BasedReservationTimeout(frames) :<value>
MaximumCellRadius(km) :<value>
Command
Modes
Global command mode