User Manual

Chapter 4 - Operation and Administration Using the CLI Managing BSs
4Motion 754 System Manual
4.8.30 Displaying Status Information for HARQ
Maximum Retransmissions Parameter
The HARQ Maximum Retransmissions is the maximal number of retransmissions
of an uplink HARQ sub-burst.
To display status information of HARQ Maximum Retransmissions parameter,
run the following command:
Privilege
Level
1
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<(1 to 16777215
StepSize 1)>
The BS ID
Specify a value for this
parameter if you want to
display Alarm Threshold
parameters of a specific BS.
Do not specify a value for this
parameter if you want to
display Alarm Threshold
parameters of all BSs.
Optional N/A 1-16777215
Display
Format
(for each
existing BS
if requested
for all BSs)
BSIDLSB :<value>
DownlinkDroppedPacketsRatio(promil) :<value>
UnallocatedSlotsRatio :<value>
DownlinkRetransmissions(-1meansdisable) :<value>
UplinkRetransmissions(-1meansdisable) :<value>
DownlinkSub-BurstDropRate(%) :<value>
UplinkSub-BurstDropRate(%) :<value>
UplinkSub-BurstDropRate(%) :<value>
Uplink99%Noise(dBm) :<value>
Command
Modes
Global command mode