User Manual

Chapter 4 - Operation and Administration Using the CLI Managing BSs
4Motion 755 System Manual
npu# show harq bs [<(1 to 16777215 StepSize 1)
Specify the BS ID if you want to display information for a particular BS. For
example, to display the HARQ Maximum Retransmissions parameter of BS 66053,
run the following command:
npu# show harq bs 66053
Do not specify this parameter if you want to view information for all existing BSs.
To display information for all BSs, run the following command:
npu# show harq bs
Command
Syntax
npu# show harq bs [<(1 to 16777215 StepSize 1)
Privilege
Level
1
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<(1 to 16777215
StepSize 1)>
The BS ID
Specify a value for this
parameter if you want to
display the HARQ Maximum
Retransmissions parameter
of a specific BS. Do not
specify a value for this
parameter if you want to
display the HARQ Maximum
Retransmissions Pparameter
of all BSs.
Optional N/A 1-16777215
Display
Format
(for each
existing BS
if requested
for all BSs)
BSIDLSB :<value>
MaximumRetransmissions :<value>