User Manual

Chapter 4 - Operation and Administration Using the CLI Monitoring Performance of Hardware and Software

4Motion 780 System Manual

4.10.1.3 Displaying Packets Discarded Via Rate Limiting

To retrieve the number of packets discarded because of rate limiting for a specific

or all applications (pre-defined, user-defined or all), run the following command:

npu# show rate-limit counters {ftp | telnet | tftp | ssh | icmp |

snmp | R4-R6 | igmp | eap | arp | all-others | <user-defined-app> |

all}

NOTE

For more information about setting thresholds for CPU and memory usage, refer to “Displaying

CPU and Memory Utilization Limits for the NPU” on page 183

Command

Syntax

npu# show resource usage

Privilege

Level

Display

Format

Resource Usage[in %]

CPU <value>

Memory 7<value>

Command

Modes

Global command mode

NOTE

For more information about configuring rate limiting, refer to “Configuring the Rate Limiting

for the NPU” on page 184

Command

Syntax

npu# show rate-limit counters {ftp | telnet | tftp | ssh | icmp | snmp |

R4-R6 | igmp | eap | arp | all-others | <user-defined-app> | all}

Privilege

Level