User Manual

Chapter 3 - Commissioning Completing the Site Configuration Using AlvariSTAR
4Motion 106 System Manual
3.2.4.3 Antenna
Antenna entities must be created for all installed and connected antennas (you
may create an Antenna entity also for antennas that are not installed/connected
yet).
1 In the Anteena screen, click on the Add New Antenna button.
2 In the Antenna Parameters section, define the following:
» Number of Ports
» Heading
3 Click Apply.
4 Repeat the process for all required Antenna entities.
3.2.4.4 GPS
The default GPS Type is Trimble. If there is no GPS, the value should be changed
to None.
Click Apply for the device to accept the change.
3.2.5 ASNGW Configuration
3.2.5.1 AAA Screen
1 Configure the following mandatory parameters:
» Primary AAA Server (IP address)
» RADIUS Shared Secret
» ASNGW NAS ID
2 Click Apply for the device to accept the configuration.
To create a new Antenna entity:
NOTE
ASNGW screens are available only for Distributed ASNGW topology (see also “Site
Configuration” on page 104
.