User Manual

Chapter 4 - Operation and Administration Using the CLI NPU Configuration
4Motion 208 System Manual
When you execute this command, the QoS classification rule is deleted from the
ACL.
IMPORTANT
An error may occur if you specify a combination of parameters that do not match any of the existing
QoS classification rules.:

Command
Syntax
npu(config-ext-nacl)# no qos-mark {{host <src-ip-address>} {{tcp | udp}
srcport <short (1-65535)>} qosclassifier <short (1-65535)>}
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[host
<src-ip-addres
s>]
Indicates the IP address of
the host interface that
generates the traffic for which
this classification rule is to be
deleted.
Mandatory N/A Valid IP
address
(assigned to
the
internal-manag
ement,
external-mana
gement or
bearer IP
interface)
{tcp | udp} Indicates the transport
protocol.
Mandatory N/A
 tcp
 udp
srcport <short
(1-65535)>
Indicates the source port
number of the application
traffic for which this QoS
classification rule is to be
deleted.
Mandatory N/A 1-65535
qosclassifier
<class-map-num
ber (1-65535)>
Indicates the identifier of the
QoS class-map associated
with the classification rule to
be deleted. For more
information about
class-maps, refer
Section 4.3.7.1.
Mandatory N/A 1-65535