User Manual

Chapter 4 - Operation and Administration Using the CLI NPU Configuration
4Motion 244 System Manual
4.3.9.3.4 Terminating the Interface Configuration Mode
To exit the interface configuration mode and return to the global configuration
mode, run the following command:
npu(config-if)# exit
4.3.9.4 Displaying ACL Configuration Information
Run the following command to display the configuration information for a specific
ACL:
npu# show access-lists [{<access-list-number (1-199)> |
<access-list-name}]
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
{<access-list-
number
(1-199)> |
<access-list-n
ame>}
Indicates the number/name of
the ACL to be deattached
from this interface.
Mandatory N/A
 1-99
 String
Command
Modes
Interface configuration mode
Command
Syntax
npu(config-if)# exit
Privilege
Level
10
Command
Modes
Interface configuration mode
IMPORTANT
An error may occur if the ACL number/name you have specified does not exist.