User Manual

Chapter 4 - Operation and Administration Using the CLI NPU Configuration
4Motion 251 System Manual
4.3.10.1.3 Displaying the Next-hop IP Address-Network ID Mapping
To display the next-hop-IP address mapped to a network ID or all network IDs,
run the following command:
npu# show idip [<nw-id>]
Specify the network ID if you want to display a particular the next-hop-IP
address-network ID mapping. Do not specify a value for this parameter if you
want to view all the next-hop-IP address-network ID mappings.
CAUTION
Specify the network ID if you want to delete a specific next-hop IP address-network ID mapping.
Otherwise all the configured mappings are deleted.
Command
Syntax
npu(config)# no idip [<nw-id>]
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<nw-id> Denotes the network ID(s) for
which an IDIP context is to be
removed.
Specify this parameter only if
you want to delete a specific
network ID.
If you do not specify a value
for this parameter, all
configured network IDs are
deleted.
Mandatory N/A 6-byte ID
Command
Modes
Global configuration mode
Command
Syntax
npu# show idip [<nw-id>]