User Manual

Chapter 4 - Operation and Administration Using the CLI NPU Configuration
4Motion 265 System Manual
[ntwentry-hold
time
<timeout>]
Denotes the period, in
seconds, within which the MS
should be authenticated for
initial entry into the network. If
the MS is not authenticated
within this period, the NPU
terminates the request for
network entry.
Optional 5 0-100
[eaptransfer-r
etries
<retransmissio
ns>]
Denotes the maximum
number of times the MS can
attempt for initial entry to the
network. If the number of EAP
transfers exceeds the value
of this parameter, the NPU
de-registers the MS.
Optional 3 0-5
[eaptransfer-i
nterval
<timeout>]
Denotes the period, in
milliseconds, the NPU waits
for the EAP identity response.
Optional 500 10 - 100000
[reauth-attemp
ts <counter>]
Denotes the maximum
number of times the NPU
may handle a an
MS/network-initiated
re-authentication request.
When the number of
re-authentication attempts
exceeds the value of this
parameter, the MS is
de-registered.
Optional 3 0-10
[reauthcmplt-h
oldtime
<timeout>]
Denotes the period, in
milliseconds, within which,
re-authentication of the MS
should be complete. If the MS
is not authenticated within
this period, the NPU
reinitiates MS authentication.
Optional 5000 10 - 100000
[eaptransfer-r
oundtrips
<counter>]
Denotes the number EAP
roundtrips in one
authentication/re-authenticati
on process.
Optional 4294967
295
0 -
4294967295
[pmk-lifetime
<timeout>]
Denotes the period, in
seconds, for which the MS
authentication key is valid. At
the end of this period, the
NPU de-registers the MS.
Optional 3600 60-86400