User Manual

Chapter 4 - Operation and Administration Using the CLI NPU Configuration
4Motion 267 System Manual
4.3.10.6.3 Displaying Configuration Information for the Authenticator Function
To display configuration information for the Authenticator function, run the
following command:
npu# show authenticator
NOTE
Refer to Section 4.3.10.6.1 for a description and default values of these parameters.
Command
Syntax
npu(config)# no authenticator
[eapidreq-retries] [eapidreq-interval]
[ntwentry-holdtime] [eaptransfer-retries] [eaptransfer-interval]
[reauth-attempts] [reauthcmplt-holdtime] [eaptransfer-roundtrips]
[pmk-lifetime] [pmk-guardtime] [authfailure-holdtime] [max-ntwentry]
Privilege
Level
15
Command
Modes
Global configuration mode
Command
Syntax
npu# show authenticator
Privilege
Level
1