User Manual

Chapter 4 - Operation and Administration Using the CLI NPU Configuration
4Motion 289 System Manual
4.3.10.11.6 Displaying Configuration Information for the Bearer Plane QoS
Marking Rules
To display configuration information for specific or all bearer plane QoS marking
rules, run the following command:
npu# show bearerqos [<qos-alias>]
Specify the QoS alias if you want to display configuration information for a
particular bearer plane QoS marking rule. Do not specify a value for this
parameter if you want to view configuration information for all bearer plane QoS
marking rules.
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[<qos-alias>] Denotes the QoS alias of the
bearer QoS marking rule that
you want to delete. Specify a
value for this parameter if you
want to delete a specific
bearer QoS marking rule.
Do not specify a value for this
parameter if you want to
delete all bearer QoS marking
rules.
Optional N/A String
Command
Modes
Global configuration mode
Command
Syntax
npu# show bearerqos [<qos-alias>]
Privilege
Level
1