User Manual

Chapter 4 - Operation and Administration Using the CLI NPU Configuration
4Motion 300 System Manual
4.3.10.12.6 Displaying Configuration Information for the Service Interface
To display configuration information for one or all service interfaces, run the
following command:
npu# show srvc-intf <intf-alias>
Specify a value for the intf-alias parameter if you want to display configuration
information for a particular service interface. Do not specify a value for this
parameter if you want to view configuration information for all service interfaces.
Command
Modes
Global configuration mode
Command
Syntax
npu# show srvc-intf
intf-alias>
Privilege
Level
1
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<intf-alias>
The alias of the service
interface that you want to
display. If you do not specify a
value for this parameter, all
the services interfaces that
are configured, are displayed.
Optional N/A String
Display
Format
IP-IP
Service
Interface
% Asn-gateway Srvc Intf config
Srvcif-Alias <string>
SrvcifDescr <string>
intf-type IP-IP
SrvcifTunSrcIpAddr <IP address>
SrvcifTunDstIpAddr <IP address>
Tunnel-Chksum is <Disable/Enable>
TunIPIPMTU <size>