User Manual

Chapter 4 - Operation and Administration Using the CLI NPU Configuration
4Motion 332 System Manual
4.3.10.14.4.4.3Removing the DHCP Relay suboption values
Run the following command to remove one, several or all of the Suboption values
configured by the user for DHCP Option 82.
npu(config-srvcgrp-dhcprelay-opt82)# no [Subopt1value] [Subopt2value]
[Subopt6value] [Subopt7value]
4.3.10.14.4.4.4Terminating the DHCP Relay Configuration Mode
Run the following command to terminate the DHCP relay configuration mode for
this service group:
npu(config-srvcgrp-dhcprelay)# exit
Command
Syntax
npu(config-srvcgrp-dhcprelay-opt82)# no [Subopt1value] [Subopt2value]
[Subopt6value] [Subopt7value]
Privilage
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
no
[Subopt1value]
[Subopt2value]
[Subopt6value]
[Subopt7value]
Indicates the removal status
of DHCP Option 82
suboptions.
If no suboption is specified,
the values of all suboptions
will be removed.
Optional N/A N/A
Command
Mode
Service group-DHCP relay-Option 82 configuration mode
Command
Syntax
npu(config-srvcgrp-dhcprelay)# exit
Privilege
Level
10