User Manual

Chapter 4 - Operation and Administration Using the CLI NPU Configuration
4Motion 334 System Manual
4.3.10.14.7 Displaying Configuration Information for the Service Group
To display configuration information for one service group or for all service
groups, run the following command:
npu# show srvc-grp [<grp-alias>]
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<grp-alias> Denotes the group-alias for
which the service group to be
deleted.
Mandatory N/A String
Command
Modes
Global configuration mode
Command
Syntax
npu# show srvc-grp [<grp-alias>]
Privilege
Level
1
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[<grp-alias>] Denotes the group-alias for
which the service group to be
displayed.
If no grp-alias is specified, the
parameters of all service
groups will be displayed.
Optional N/A String
Display
Format
According to configured DHCP mode and other parameters.