User Manual

Chapter 4 - Operation and Administration Using the CLI NPU Configuration
4Motion 342 System Manual
[ulqos-maxsustainedrate <value(10000-10000000)>]
[ulqos-trafficpriority <value(0-7)>] [dldatadlvry-type
<type(0<UGS> | 1<RTVR> | 2<NRTVR> | 3<BE> | 4<ERTVR> | 255<ANY>)>]
[dlqos-maxsustainedrate <value(10000-10000000)>]
[dlqos-trafficpriority <value(0-7)>] [ulSfQosMinReservedRate
<integer>] [ulSfQosMaxLatency <integer>] [ulSfQosToleratedJitter
<integer)>] [ulSfQosUnsolicitedGrantInterval <integer(0-65535)>]
[ulSfQosSduSize <integer(0-255)>] [dlSfQosMinReservedRate
<integer>] [dlSfQosMaxLatency <integer>] [dlSfQosToleratedJitter
<integer>] [dlSfQosSduSize <integer(0-255)>])
IMPORTANT
An error may occur if you provide an invalid value for any of these parameters. Refer the syntax
description for more information about the appropriate values and format for configuring these
parameters.
Command
Syntax
npu(config-srvcprfl-flow)# config ([flow-type <type (1)>] [cs-type <type
(1 | 4)>] [media-type <string>] [uldatadlvry-type <type(0<UGS> | 1<RTVR>
| 2<NRTVR> | 3<BE> | 4<ERTVR> | 255<ANY>)>] [ulqos-maxsustainedrate
<value(10000-10000000)>] [ulqos-trafficpriority <value(0-7)>]
[dldatadlvry-type <type(0<UGS> | 1<RTVR> | 2<NRTVR> | 3<BE> | 4<ERTVR> |
255<ANY>)>] [dlqos-maxsustainedrate <value(10000-10000000)>]
[dlqos-trafficpriority <value(0-7)>] [ulSfQosMinReservedRate <integer>]
[ulSfQosMaxLatency <integer>] [ulSfQosToleratedJitter <integer)>]
[ulSfQosUnsolicitedGrantInterval <integer(0-65535)>] [ulSfQosSduSize
<integer(0-255)>] [dlSfQosMinReservedRate <integer>] [dlSfQosMaxLatency
<integer>] [dlSfQosToleratedJitter <integer>] [dlSfQosSduSize
<integer(0-255)>])
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[flow-type
<type (1)>]
Denotes the type of flow, that
is, bi-directional (1) or
multicast (2).
multicast (2) is not supported
in current release.
Optional 1
 1: Indicates
bi-direction
al