User Manual

Chapter 4 - Operation and Administration Using the CLI NPU Configuration
4Motion 343 System Manual
[cs-type <type
(1 | 4)>]
Convergence Sublayer Type.
This parameter is applied to
both UL and DL Service
Flows.
Must match the type of
service group referenced by
ServiceGrpAlias during
creation of the flow: IPv4CS
should be selected if the
assigned Service Group is .of
type IP. VLANCS should be
selected if the assigned
Service Group is either
VPWS-Transparent or
VPWS-QinQ.
Optional 1
(IPv4CS)
 1: IPv4CS.
4: VLANCS
[media-type
<string>]
Describes the type of media
carried by the service flow.
Optional Null String, up to 32
characters
[uldatadlvry-t
ype
<type(0<UGS> |
1<RTVR> |
2<NRTVR> |
3<BE> |
4<ERTVR> |
255<ANY>)>]
Denotes the data delivery
type for uplink traffic carried
by the service flow.
Optional 3 (BE) 0-4 or 255 for
ANY.
[ulqos-maxsust
ainedrate
<value(10000-1
0000000)>]
Denotes the maximum
sustained traffic rate, in bps,
for uplink traffic carried by the
service flow.
Although available for all
service flows, applicable only
for service flows with the
appropriate uplink data
delivery type (NRTVR,
RTVR, BE, ERTVR, ANY)
Optional 250000 10000-100000
00 bps
[ulqos-traffic
priority
<value(0-7)>]
Denotes the traffic priority to
be applied to the uplink traffic
carried by the service flow.
Optional 0 0-7, where 0 is
lowest and 7 is
highest