User Manual

Chapter 4 - Operation and Administration Using the CLI NPU Configuration
4Motion 345 System Manual
[ulSfQosMaxLat
ency
<integer>]
The maximum latency in ms
allowed in the uplink.
Although available for all
service flows, applicable only
for service flows with the
appropriate uplink data
delivery type (UGS, RTVR,
ERTVR).
If uplink data delivery type is
ERTVR or UGS,the default
value should be 90ms.
Optional 500 0- 4294967295
[ulSfQosTolera
tedJitter
<integer)>]
the maximum delay variation
(jitter) in milliseconds for this
uplink service flow.
Although available for all
service flows, applicable only
for service flows with the
appropriate uplink data
delivery type (UGS, ERTVR)
Optional 0 0- 4294967295
[ulSfQosUnsoli
citedGrantInte
rval
<integer(0-655
35)>]
The nominal interval in ms
between successive data
grant opportunities for this
uplink service flow.
Although available for all
service flows, applicable only
for service flows with the
appropriate uplink data
delivery type (UGS, RTVR,
ERTVR).
Must be lower than
ulSfQosMaxLatency.
Optional 20 0-65535
[ulSfQosSduSiz
e
<integer(0-255
)>]
Represents the number of
bytes in the fixed size SDU.
This parameter may be used
for a UGS service flow when
the length of IP packets on
the data plane is fixed and
known in advance.
Although available for all
service flows, applicable only
for service flows with the
appropriate uplink data
delivery type (UGS).
Optional 49 0-255