User Manual

Chapter 4 - Operation and Administration Using the CLI NPU Configuration
4Motion 355 System Manual
4.3.10.15.3.6 Deleting Service Profiles
Run the following command to delete one or all service profiles:
npu(config)# no srvc-profile [<profile-name>]
4.3.10.15.4 Configuring Classification Rules
Classification rules are user-configurable rules that are used to classify packets
transmitted on the bearer plane. You can associate one or more classification
rules with a particular service profile (For details, refer to Section 4.3.10.15.3.3.4).
You can define an L3 classification rule with respect to the following criteria:
 IP ToS/DSCP
 IP protocol (such as UDP or TCP)
NOTE
The Default Service Profile cannot be deleted.
CAUTION
Specify the profile name if you want to delete a specific service profile. Otherwise all the configured
service profiles (excluding the Default Service Profile) are deleted.
Command
Syntax
npu(config)# no srvc-profile [<profile-name>]
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[<profile-name
>]
Denotes the name of the
service profile you want to
delete. Specify this parameter
only if you want to delete a
specific service profile.
Optional N/A String
Command
Modes
Global configuration mode