User Manual

Chapter 4 - Operation and Administration Using the CLI Using the Command Line Interface for 4Motion System
4Motion 127 System Manual
4.1.5.2.2 Deleting a Password for a Privilege Level
To delete a password for a privilege level, run the following command:
npu(config)# no enable password
[Level <0-15>]
Privilege
Level
15
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
[Level <0-15>] Indicates the privilege level
for which a password is to be
enabled.
Optional 15 0-15
<password> Denotes the password to be
assigned for the current
privilege level.
Mandatory N/A String (up to 20
characters and
case-sensitive)
Command
Modes
Global configuration mode
IMPORTANT
Only users who have logged in as root can execute this command.
IMPORTANT
An error may occur if:
 The privilege level that you have specified is not within the range, 0-15.
 You are trying to delete a password for a privilege level that is higher than your default privilege
level.
Command
Syntax
npu(config)# no enable password [Level <0-15>]
Privilege
Level
root