User Manual

Chapter 4 - Operation and Administration Using the CLI NPU Configuration
4Motion 413 System Manual
 AU Counters Groups (per-BS counters)
» De-Registration
» Integrity
» Mobility
» Network Entry (NE)
» Traffic
» Utilization
» General
» All MS Basic Mode
» Specific MS Advanced Mode (not supported in current release)
For details on the performance data counters collected for each group refer to the
relevant 4Motion Performance Monitoring document.
You can specify the group for which performance data is to be stored and
collected, and the interval after which this data should be fetched.
The data is stored in an XML file called, prf_yyyymmddhhmm.xml.gz in the path,
TFTP/boot/Management/Performance Manager. The system maintains this data
for a maximum of 24 hours after which it is deleted. It is recommended that you
periodically make a backup of these files on an external server.
You can enable/disable collection of performance data for each group separately.
In addition, you can specify the interval after which this data should be obtained
from each group. This section describes:
 “Enabling Collection and Storage of Historical Performance Data” on page 414
 “Disabling Collection and Storage of Performance Data” on page 417
 “Displaying the Status of Performance Data Collection” on page 419