User Manual

Chapter 4 - Operation and Administration Using the CLI NPU Configuration

4Motion 414 System Manual

4.3.12.1 Enabling Collection and Storage of Historical Performance

Data

4Motion collects and stores performance data for the a number of system groups

(refer to Section 4.3.12). To enable collection and storage of performance data for

a group, run the following command:

To enable collection and storage of performance data for an NPU counters group:

npu(config)# group enable {pmNpuBckhlPort | pmNpuMgmtPort |

pmNpuCascPort | pmAuPort | pmNpuIntMgmtIf | pmNpuExtMgmtIf |

pmNpuLclMgmtIf | pmNpuBearerIf | pmSfa | pmDatapathFn | pmAaaClient

pmDhcpServer | pmMsStateChangeFn}

To enable collection and storage of performance data for an AU counters group:

npu(config)# group enable au { pmBsDeRegistration | pmBsIntegrity |

pmBsMobility | pmBsNetworkEntry | pmBsTraffic | pmBsUtilization |

pmBsGeneral | pmbsallmsbasicmode | pmbsspecificmsadvancedmode}

You can display whether performance data collection is currently enabled or

disabled for a particular group. For details, refer Section 4.3.12.3.

The parameters in this command correspond to the groups listed in the following

tables:

NOTENOTE

Using this command, you can enable collection of performance data for only one group at a time.

For example, run the following command if you want to enable performance data collection and

storage for the data path function:

npu(config)# group enable pmDatapathFn

Table 4-22: NPU Counters Groups for which Performance Data can be Collected

Parameter Name Refers to...

pmNpuBckhlPort NPU DATA port

pmNpuMgmtPort NPU MGMT port

pmNpuCascPort NPU CASCADE port

pmAuPort AU ports

pmNpuIntMgmtIf NPU internal-management interface

pmNpuExtMgmtIf NPU external-management interface

pmNpuLclMgmtIf NPU local-management interface