User Manual

Chapter 4 - Operation and Administration Using the CLI NPU Configuration
4Motion 415 System Manual
For example, run the following command if you want to enable performance data
collection for the NPU DATA port:
npu(config)# group enable pmNpuBckhlPort
When you run this command, collection and storage of performance data is
enabled for the DATA port counters.
pmNpuBearerIf NPU bearer interface
pmSfa Service flow authorization
pmDatapathFn Data path functionality
pmAaaClient AAA client functionality
pmAuthenticator Authenticator function
pmContextFn Context function
pmDhcpProxy DHCP proxy functionality
pmDhcpRelay DHCP relay functionality
pmDhcpServer DHCP server functionality
pmMsStateChangeFn MS state change functionality
Table 4-23: AU Counters Groups for which Performance Data can be Collected
Parameter Name Refers to...
pmBsDeRegistration
De-Registration
pmBsIntegrity
Integrity
pmBsMobility
Mobility
pmBsNetworkEntry
Network Entry
pmBsTraffic
Traffic
pmBsUtilization
Utilization
pmBsGeneral
General
pmbsallmsbasicmode
All MS Basi Modec
pmbsspecificmsadvancedmode
Specific MS Advanced Mode (not supported in
current release)
Table 4-22: NPU Counters Groups for which Performance Data can be Collected
Parameter Name Refers to...