User Manual

Chapter 4 - Operation and Administration Using the CLI NPU Configuration
4Motion 446 System Manual
In addition to the configurable parameters, the calculated Local Time is also
displayed.
4.3.14.2.10 Displaying the Position Parameters
To display the current position parameters, run the following command:
npu# show position [{Latitude | Longitude | Altitude}]
4.3.14.2.11 Displaying the Clock Mode Parameter
To display the current clock mode parameter, run the following command:
npu# show npu clock mode
Command
Modes
Global command mode
Command
Syntax
npu# show position [{Latitude | Longitude | Altitude}]
Privilege
Level
1
Syntax
Description
For a detailed description of each parameter in this command, refer the section,
“Configuring
the Position” on page 440
.
Display
Format
Latitude :
Longitude :
Altitude :
Command
Modes
Global command mode
Command
Syntax
npu# show npu clock mode
Privilege
Level
1