User Manual

Chapter 4 - Operation and Administration Using the CLI NPU Configuration
4Motion 449 System Manual
4.3.14.3.2 Displaying Configuration Information for Power Feeders
To display configuration information for all defined Power Feeders, run the
following command:
npu# show power-feeder configuration
pfAuPortNoDest
ination
<pfAuPortNoDes
tination
(-1,1-4)>
Each combination
of AU Slot Number
and Port Number
can appear in a
maximum of one
Power Feeder
instance (excluding
combinations with
a none value).
The AU Port number.
-1 means none.
Mandatory -1 (none) -1 (none), 1-4
Command
Modes
Global configuration mode
Command
Syntax
npu# show power-feeder configuration
Privilege
Level
1
Display
Format (for
each
configured
instance)
PfUnitNo : <value>, PfPortNo : <value>, AuPortNo : <value>, AuSlotNo :
<value>
........
Command
Modes
Global command mode