User Manual

Chapter 4 - Operation and Administration Using the CLI NPU Configuration
4Motion 155 System Manual
Do not specify the port number and type if you want to display configuration
information for all physical interfaces.
IMPORTANT
An error may occur if you specify an interface type or ID that does not exist.
Command
Syntax
npu# show vlan port config [port <interface-type> <interface-id>]
Privilege
Level
1
Syntax
Description
Parameter Description Presence Default
Value
Possible Values
<interface-typ
e>
Indicates the type of physical
interface for which VLAN
membership information is to
be displayed.
Optional N/A
 fastethernet
 gigabitethernet
<interface-id> Indicates the ID of the
physical interface for which
VLAN membership
information is to be displayed.
Optional N/A Fast Ethernet:
 0/1
 0/2
 0/3
 0/4
 0/5
 0/6
 0/7
 0/8
Gigabit Ethernet:
 0/9
 0/10