User Manual

Chapter 4 - Operation and Administration Using the CLI NPU Configuration
4Motion 165 System Manual
4.3.2.3.8 Displaying IP Interface Status and Configuration Information
To display the status and configuration information for an IP interface, run the
following command:
npu# show ip interface [{internal-mgmt | external-mgmt | bearer |
local-mgmt}]
Do not specify the interface if you want to view configuration information for all IP
interfaces.
Privilege
Level
10
Command
Modes
Interface configuration mode
IMPORTANT
An error may occur if the IP interface does not exist for the configured connectivity and boot mode.
Command
Syntax
npu# show ip interface [{internal-mgmt | external-mgmt | bearer |
local-mgmt}]
Privilege
Level
1
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
{internal-mg
mt |
external-mgm
t | bearer |
local-mgmt}
Indicates the interface for
which configuration
information is to be displayed.
Do not specify any value for
this parameter if you want to
view configuration information
for all IP interfaces.
Optional N/A
 internal-mgm
t
 external-mg
mt
 bearer
 local-mgmt