User's Manual

80 Operation
Chapter 4 - Operation
and some optional parameters that provide information on the ownership and
location of the unit.
4.3.4 BST/AU Parameters
The BST/AU Parameters menu enables viewing and configuring the parameters
that define the Base Station(s)/AU(s) with which the unit can synchronize,
including parameters related to the Best BST/AU selection feature.
4.3.5 Radio Parameters
The Radio Parameters menu enables viewing and configuring the radio
parameters necessary for communication with the Base Station, including
parameters of the frequency scanning mechanism.
4.3.6 Multirate and ATPC Parameters
The Multirate and ATPC Parameters menu enables temporary control of the
transmitted signal for testing purposes.
4.3.7 Performance Monitoring
The Performance Monitoring menu enables viewing continuously updated link
quality parameters and traffic counters.
4.3.8 FDD Parameters
The FDD Parameters menu enables viewing/updating the Radio parameters for
Standard operation mode. These parameters do not affect the operation of the unit
when using Advanced Si operation mode. These parameters are provided to
support the Automatic Platform Detection mechanism of the dual-mode CPEs,
allowing pre-configuration of the relevant parameters before switching the sector
to operate in FDD mode using Standard operation mode. These parameters will be
applicable only to SUs in the 3.x GHz bands, when a SW version supporting APD
in FDD mode will be available. This menu is not applicable to units in the 2.x GHz
bands
4.3.9 Exit
Select the Exit option to exit the Monitor program and terminate the Telnet
session.