User's Manual

100 Operation
Chapter 4 - Operation
 Clear Best AU Table
 Force full scanning
4.7.2.1 Show Scanning Parameters
The Show Scanning Parameters option enables viewing the following:
 Start Rx Frequency
 End Rx Frequency
 Scanning Main Step
 Scanning Intermediate Steps
 Discrete Frequencies
4.7.2.2 Show Scanning Tables
Select this option to view the Full Scanning Table, displaying a list of all current
frequencies that participate in the full scanning process. At the end of the
displayed list, the Best AU Scanning Table displays all the frequencies associated
with AUs that are included in the current Best AU Table.
4.7.2.3 Start Rx Frequency (MHz)
The lowest frequency in the range of frequencies to be scanned.
The available values depend on the radio band of the unit and selected
Bandwidth.
4.7.2.4 End Rx Frequency (MHz)
The highest frequency in the range of frequencies to be scanned.
The available values depend on the radio band of the unit and selected
Bandwidth.
4.7.2.5 Scanning Main and Intermediate Steps
The Main Scanning Step, that together with the Intermediate Scanning Steps
define the frequencies to be scanned between the Start and End Rx Frequencies.
For 2.x/3.x GHz units and a bandwidth of 3.5 MHz, the range is from 125 KHz to
1750 KHz, in steps of 125 KHz. The default is 875 KHz.