Technical Manual

Chapter 5 - Configuration Via Web Interface Basic Settings
Alvarion BreezeNET B300 71 Technical User Manual
 Default Gateway - Default Gateway for the unit
Radio Settings:
 Frequency - Central Operating Frequency. Must be equal at both sides of the
link
 TX Power - Output (TX) Power of the radio in milliwatts
 Channel Width - Operating Channel Width of the radio in - must be equal at
both sides of the link
 Tx Bitrate - Fixed Operating Bitrate (if numerical value chosen) or Auto Bitrate
(Automatic Modulation Control) if "Auto" is chosen. Auto Bitrate is
recommended
Link Settings:
 Network SID - Network System Identifier (8-digit HEX figure). Must be equal at
both sides
 Security Key - Key word to encode protocol messages. Must be equal at both
sides
 Encryption - Enables AES encryption
 Enable Polling - Turns marker access mode on. Polling is recommended for
long links (7+ km) and must be enabled just at one side (do not enable polling
at both sides, otherwise wireless connection will fail!)
MAC switch:
 Group#1 - allows to create switch group and start switching on the device
 Group#2 - allows to create a second switch group
 STP -enables Spanning Tree Protocol (STP)
 IGMP - enables IGMP snooping functionality
 Management VLAN - defines VLAN for device management