User's Manual
Table Of Contents
- BreezeNET B130/B300 GigE Technical User Manual
- Chapter 1 - Getting Started
- Chapter 2 - Hardware Description
- 2.1 Power supply units (IDU)
- 2.2 Outdoor Units (ODU)
- 2.3 Installation Preparations
- 2.3.1 Required Components and Accessories
- 2.3.2 Antenna Placement
- 2.3.3 Antenna Poles Usage
- 2.3.4 Poles with Stretching
- 2.3.5 Wall Mounted Pole
- 2.3.6 Antenna Poles Requirements
- 2.3.7 Grounding when Using IDU-BS-G
- 2.3.8 Antenna Alignment
- 2.3.9 Precaution Measures
- 2.3.10 Service Cable Soldering Procedure
- 2.3.11 Tools Required at the Installation Site
- 2.4 BU/RB-B130D/B300D-5X-GigE
- 2.5 BU/RB-B130/B300-5X-GigE
- 2.6 Mounting Kit (MOUNT-KIT-85)
- 2.7 Specifications
- Chapter 3 - Basic Configuration Instructions
- Chapter 4 - Link Configuration
- Chapter 5 - Configuration Via Web Interface
- Chapter 6 - Supplementary Information
Chapter 3 - Basic Configuration Instructions Lost Password Recovery
Alvarion BreezeNET B130/B300 GigE 44 Technical User Manual
2 Press the "+" button in the "Scheduled tasks" section of the main window.
3 In the opened "New task" window choose "Up interface" in the "Command"
field. Then type the wanted IP-address and network mask in the corresponding
fields of the window and press the "OK" button.
4 Restart the device.
After the device restarts, the "ERConsole" utility will add the wanted IP-address
into its Ethernet interface configuration.
Figure 3-4: ERConsole (Step 4)