User's Manual
Table Of Contents
- BreezeNET B130/B300 GigE Technical User Manual
- Chapter 1 - Getting Started
- Chapter 2 - Hardware Description
- 2.1 Power supply units (IDU)
- 2.2 Outdoor Units (ODU)
- 2.3 Installation Preparations
- 2.3.1 Required Components and Accessories
- 2.3.2 Antenna Placement
- 2.3.3 Antenna Poles Usage
- 2.3.4 Poles with Stretching
- 2.3.5 Wall Mounted Pole
- 2.3.6 Antenna Poles Requirements
- 2.3.7 Grounding when Using IDU-BS-G
- 2.3.8 Antenna Alignment
- 2.3.9 Precaution Measures
- 2.3.10 Service Cable Soldering Procedure
- 2.3.11 Tools Required at the Installation Site
- 2.4 BU/RB-B130D/B300D-5X-GigE
- 2.5 BU/RB-B130/B300-5X-GigE
- 2.6 Mounting Kit (MOUNT-KIT-85)
- 2.7 Specifications
- Chapter 3 - Basic Configuration Instructions
- Chapter 4 - Link Configuration
- Chapter 5 - Configuration Via Web Interface
- Chapter 6 - Supplementary Information
Chapter 5 - Configuration Via Web Interface Basic Settings
Alvarion BreezeNET B130/B300 GigE 77 Technical User Manual
5.3.6 QoS Options
This section allows managing traffic prioritization.
5.3.6.1 Auto Prioritization
This set of check-boxes allows enabling/disabling automatic traffic prioritization
for different types of packets.
RTP Packets - enables automatic prioritization for real time packets
Dot1p Tags - enables automatic prioritization for packets labeled with IEEE
802.1p priority
IP ToS - enables automatic prioritization for packets labeled with ToS
TCP Acknowledgments - enables automatic prioritization for TCP Acks.
5.3.6.2 Miscellaneous
These options allow choosing the prioritization policy applied to the traffic queues
and enabling ICMP prioritization.
"Strict Prioritization" check-box enables "Strict Priority" prioritization policy
(otherwise, by default, "Weighted Fair Queuing" policy is used).
"ICMP Prioritization" check-box enables prioritization of ICMP (Internet
Control Message Protocol) packets
Figure 5-8: QoS Options