User's Manual
Table Of Contents
- 1 Introduction
- 2 The Concept
- 3 BreezeCELL Architecture
- 4 BreezeCELL Network Elements
- 5 Frequency Allocations
- 6 MIMO Support
- 7 Monitoring & Control
- 8 Installation Requirements and Procedures
- 9 Headend Equipment Installation
- 9.1 Connector Information
- 9.2 Rack Installation
- 9.3 Connecting the BreezeCELL Equipment
- 9.4 Connecting the Monitoring System
- 9.5 Connecting External Alarms
- 9.6 Connecting the Base Stations
- 9.7 UDC Configuration
- 9.8 Pilot Master/Slave Configuration
- 9.9 Measurements
- 9.10 Connecting to the Coax TV Networks
- 9.11 Measurements
- 9.12 Localized Testing Port
- 9.13 Determining BTS Output Power VS. Remote Unit Output Power
- 10 Coax Network Amplifier Installation (if applicable)
- 11 Remote Unit Installation
- 12 Preparing for Remote Unit Installation
- 13 Normal Operations
- 14 Acceptance Testing
In-building Cellular Solution for Commercial Buildings UDC Software Configuration Tool
BreezeCELL
31
GPS NAME – Free Text
GPS Description – Free Text
Technology – Choose between GSM 900/GSM 1800/UMTS/PCS/iDEN/US Cellular/WiMAX 2.5
GHz
Bandwidth – Choose between 5/10/15 MHz
Air Up Frequency – Cellular Receive (middle frequency of band in KHz)
Air Down Frequency – Cellular Transmit (middle frequency of band in KHz)
CATV Up Frequency – Cable Receive (middle frequency of band in KHz)
CATV Down Frequency – Cable Transmit (middle frequency of band in KHz)
6. Press the SAVE button
Note: GPS changes will take place only after resetting the associated remote units (see section 3.4
controlling remote units)
13.5.2 Deleting a GPS from the Database
Note: You should delete a GPS only if there are no remote units that use this GPS!
1. From the GPS Maintenance menu choose View Global Parameters
2. Choose the relevant GPS from the list
3. Press the EDIT button on the left side of the row
4. An information screen will appear on the right side
5. Press the DELETE button
6. Press the CONFIRMATION button to delete