User's Guide

BreezeNET Management Utility
BreezeNET PRO.11 Series 4-3 User’s Guide
4 BREEZENET MANAGEMENT UTILITY
The BreezeNET Management Utility is an SNMP-based (Simple Network
Management Protocol) utility that provides a consistent view of the wireless
network. The systems administrator can use the management utility to control a
large number of DS.11 units from a single location.
Among the supported features:
• Assign radio channels for optimal cell management
• Program an Base station with a specified IP address
• Set the SNMP Write Community strings
• Verify the status of all Base stations in the network
• Perform a site survey
• Antenna selection
• Configuration of parameters
4.1 BreezeNET Management Utility Main Window
The BreezeNET Management utility main window consists of two main areas, as
can be seen in Figure 4-1:
• The IP Address and Community Selection area - In this area, you select the
community string and address of the unit you wish to manage or edit.
• The Tabs area - This area consists of five tabs containing parameter required
for the management of the WLAN. When you switch between the tabs, the IP
Selection area with the selected unit address, remains displayed.