User's Guide

BreezeNET Management Utility
User's Manual 4-10 BreezeNET DS.11
4.1.4 WLAN Parameters Tab
Figure 4-6. WLAN Parameters Tab
1. Set the ESS ID of the WLAN.
2. Select a channel.
3. Set Antenna diversity to Antenna No. 1, No. 2, or both.
4. Set the desired bit rate. For maximum bit rate support, check both 5.5 Mbps
and 11 Mbps.
Note: The 1 Mbps and 2 Mbps bit rates are checked by default.
In case of interference, the BreezeNET Management utility automatically falls
back to the lower bit rate.
5. Select the operative range of your WLAN in the Range drop down list.
6. Click
to apply the Configuration.