User's Manual

Appendix A. Radio Signal Propagation
BreezeNET DS.11 Series A-17 User’s Guide
Figure 4-1. BreezeCOM Manager Main Window (IP/SNMP Tab)
4.1.1 Selecting IP Addresses of Units
You can select a unit's IP address in one of the following ways:
• Click the
button. All the current units IP addresses
(under the selected community) are displayed in the list box below. Double-
click on an address to select it.
• For stations which are located behind a router, type the unit's address in the
Locate unit field and click
to display its parameters.
•
Signal Quality bar
- This bar appears only if the selected IP address is a SA-
DS.11 unit, and displays the signal quality between the selected Bridge unit
and the AP-DS.11 unit connected to it.
If the selected IP address is a SA-DS.11 you can view its signal quality in the
RSSI tab.
Community and
IP address
selection area
Tabs area