User's Manual

Appendix A. Radio Signal Propagation
BreezeNET DS.11 Series A-21 User’s Guide
4.1.4 The WLAN Parameters Tab
Figure 4-5. WLAN Parameters Tab
1. Set the ESS ID of the WLAN.
2. Select a channel.
3. Set Antenna diversity to Antenna No. 1, No. 2, or both.
4. Set the desired bit rate. For maximum bit rate support, check both 5.5 Mbps
and 11 Mbps.
Note:
The 1 Mbps and 2 Mbps bit rates are checked by default.
In case of interference, the BreezeNET Management utility automatically falls
back to the lower bit rate.