User's Manual

Appendix A. Radio Signal Propagation
User's Manual A-28 BreezeNET DS.11
5. SOFTWARE DOWNLOAD PROCEDURE
1. Set the unit's IP address, using the BreezeCOM Manager utility, and verify that
the PC's IP address belongs to the same Subnet Mask as the unit.
2. Ping the unit's IP address. Make sure that the Ping replies are being received.
3. Use the TFTP utility on the PC:
a) Syntax: TFTP [-i] destination host [PUT] source file [password]
b) Example: TFTP -i 199.203.141.30 put ap1100.arm private
Download will be completed within 1 minute, and a message of successful file
transfer will show on the screen.
4. Click OK; the unit resets itself.
5. Check the diagnostics LEDs, and use the BreezeNET Management utility to
make sure that the version number is correct.
Note:
Do not disconnect any cables or try to stop the process before downloading is
completed.