User Manual

Introduction To The BreezeNET PRO.11 Series
BreezeNET PRO.11 Series 1-6 User’s Guide
databases via the BreezeNET Access Point. Any two wireless stations in two
different cells can communicate through their Access Points.
Workstations that can be connected to the wireless LAN include PCs, X-
Terminals, Digital, SUN, HP, IBM, and Apple computers, and any other
device that supports Ethernet. The unit is transparent to the workgroup
devices’ hardware, software, and network operating system.
The Single Station Adapter contains an embedded SNMP agent enabling
effective management. Software upgrades are downloaded by TFTP via the
Ethernet port or via the Wireless LAN and Access Point.
Network connection is maintained while roaming between overlapping
coverage areas. Transmission and reception can be continued while moving
at high speed with no data packet loss or duplication.
The Single Station Adapter is available in two models:
• SA-10 PRO.11 with two integrated 2dbi omni-directional antennas.
• SA-10D PRO.11 for use with external antenna(s).
1.3.3. Four Port Station Adapter
The BreezeNET Four-Port Workgroup Adapter is a wireless LAN adapter
that connects a workgroup of up to four Ethernet-equipped workstations to
the wireless LAN. The Four Port Station Adapter is transparent to the
workgroup devices’ hardware and software, allowing plug-and-play
installation.
Figure 1.3: SA-40 PRO.11 with Two
Integrated Omni-Directional Antennas