User Manual

SA-PCR PRO.11 PC Card Installation, Setup, and Management
BreezeNET PRO.11 Series 4-7 User’s Guide
4.1.3.3 Installation for Windows NT
⇒⇒ To install on Windows NT, do the following:
1. Press the Windows Start button, select Settings, and then select
Control Panel. Double-click on the Network icon.
2. If the message The Windows NT Networking is not installed. Do
you want to install it now?, continue with step 2a. If this message
does not appear, continue with step 2b.
a. Press Yes and choose Wired to the network. When a list of
supported network adapters appears, press Have Disk.
b. Go to the Adapters tab, press Add, and then press Have Disk.
3. Insert the BreezeCOM drivers diskette, enter the location of the
diskette (such as a:\) and press OK.
4. From the list choose BreezeNET Wireless LAN PC Card and press
OK. The SA-PCR LAN Adapter Properties window appears.
Figure 4.3: SA-PCR LAN Adapter Properties Window
5. The default settings are memory range D0000h to D3FFFh,
IRQ 11. In the following steps we will verify that these default
settings are acceptable for your machine.
Note: If the SA-PCR Configuration application is already installed, you can
access it directly by pressing Advanced.
6. Press the Windows Start button and select Run. Type WINMSD
and press OK. The Windows NT Diagnostics window appears.