User Manual

SA-PCR PRO.11 PC Card Installation, Setup, and Management
BreezeNET PRO.11 Series 4-11 User’s Guide
• Reinstall – After disabling conflicting resources, reinstall the SA-PCR.
4.1.8. Uninstalling SA-PCR Drivers and Applications
This section describes how to uninstall the SA-PCR drivers, and the
SA-PCR applications.
⇒⇒ To uninstall SA-PCR drivers:
If your operating system is Windows 95, you must first do the following:
1. Press the Windows Start button, select Settings, and then Select
Control Panel. Double click on the PC Card icon, select
BreezeCOM Wireless LAN PC Card and press Stop. Close all
active applications. Continue below.
If your operating system is Windows 98 or NT, start here.
1. Press the Windows Start button, select Settings, and then select
Control Panel. Double click on the Network icon, go to the
Configuration tab, select BreezeCOM Wireless LAN Adapter, and
press Remove.
2. When asked to restart the computer, press No.
3. Insert the BreezeCOM Drivers diskette. Press the Windows Start
button, select Run, and type a:\DrvClean.
4. When notified that the SA-PCR driver has been deleted, press
Setup.
5. Restart the computer.
⇒⇒ To uninstall SA-PCR applications:
1. Press the Windows Start button, select Settings, and then select
Control Panel. Double click on the Add/Remove Programs icon,
select BreezeCOM PCMCIA Applications and press Add/Remove.