User Manual
SA-PCR PRO.11 PC Card Installation, Setup, and Management
BreezeNET PRO.11 Series 4-12 User’s Guide
4.2. Using the SA-PCR Configuration Application
This section describes how to use the SA-PCR Configuration application to
configure and manage your SA-PCR Card.
4.2.1. Accessing the Application
Open the SA-PCR Configuration application as follows:
• Press the Start button, select Programs, select the BreezeCOM
Application program group and choose Configuration.
The SA-PCR Configuration main window opens.
4.2.2. Main Window
The SA-PCR Configuration main window contains four tabs described in
the following sections. In addition, the main window contains the following
buttons:
• OK – Implements any changes you made and closes the window.
• Undo – Causes the window to display currently active values. This is
useful if you started changing values and you want to start again from
the current values.
• Cancel – Closes the window without implementing any changes you
made.
• Apply – Implements any changes you made but leaves the window
open.
4.2.3. Resetting the PC Card
⇒⇒ To reset the Card, close the Configuration and Site Survey applications
and then do one of the following:
• Restart the computer, or
• Stop the PC card then eject and reinsert the Card, or