User Manual

SA-PCR PRO.11 PC Card Installation, Setup, and Management
BreezeNET PRO.11 Series 4-13 User’s Guide
• Stop and refresh the driver as follows:
• Right-click the My Computer icon on the desktop, choose
Properties, and go to the Device Manager tab.
• Select Network Adapters, select BreezeCOM WLAN Adapter,
and press Refresh.
4.2.4. Station Status Tab
The Station Status tab of the SA-PCR Configuration application displays
basic information about the Card and its drivers and shows current Card
status.
Figure 4.6: Station Status Tab
The Station Status tab contains the following parameters:
• Firmware Version – Displays the version of unit’s current firmware
(internally installed software). The first two numbers of the firmware
and driver versions should be identical. The remaining numbers (if any)
indicate the minor version. The final letter indicates the hardware
version.
• Driver Version – Displays the version of unit’s current driver.