User Manual

Planning and Installing Wireless LANs
BreezeNET PRO.11 Series 4-6 User’s Guide
• Adjust the antennas
• Adjust the location of the Station Adapter
• Adjust the location of the Access Point
5. Proceed to setup the other workstations.
Figure 5.3: Single Cell Configuration
Disclaimer: This diagram is for illustrative purposes only. It should not be
confused with the transceiver operating in a standalone mode. When this diagram
is in use, the transceiver will be used in conjunction with amp model
AMP-2440-250/500 and the antennas listed in this manual.