User's Manual

Amplifier Kit
BreezeNET PRO.11 Series 0-4 User’s Guide
Power Supply
The AMP2440 comes with power supplies that have standard 2.1 mm barrel plugs
(which are configured as positive (+) tip and negative (-) outer conductor).
Although normally supplied with a power supply, any regulated 12 Volt DC 1 amp
supply can be used. The power supply can be used with 110 or 240 VAC power.
Operation
The unit operates automatically and there are no user adjustments.
The amplifier is only intended for use with the BreezeNET Radios. These radios
“ping pong” back and forth between transmit and receive so quickly, during normal
operation, that both the TX and RX LEDs will appear to be lit simultaneously. In
fact, they are turning on and off so quickly that they appear to be on all the time.
You can tell how quickly one of these LEDs are turning on and off by their
brightness. Their glow will be slightly dimmer when they are off.