User's Manual

Introduction To The BreezeNET PRO.11 Series
BreezeNET PRO.11 Series 1-9 User’s Guide
1.5. BreezeNET PRO.11 Functional Description
BreezeNET PRO.11 units add wireless functionality to existing Ethernet
LANs.
The AMP2440 and the BreezeNET radio modem must be professionally installed.
Table (1) shows the FCC approved configuration of the AMP2440, BreezeNET Radio
and antenna configurations.
WARNING:
It is the responsibility of the installer to ensure that when used in the
United States (or where FCC rules apply), only these configurations are used. The use
of any antenna other than those listed below is expressly forbidden in accordance to
FCC rules CFR47 part 15.204.
Table (1) FCC Type Acceptance Configurations
Radio
Equipment
UNI-24
24 dBi
Grid
UNI-18
18 dBi
Grid
UNI-16
16 dBi
Panel
UNI-13
13 dBi
Panel
UNI-11
11 dBi
Panel
OMNI-8
8 dBi
Omni
OMNI-6
6 dBi
Omni
BreezeNET
PRO.11
X
*
X X X X X X
BreezeNET
PRO.11 with
Amp2440-250
X
*
X X X X X X
BreezeNET
PRO.11 with
AMP2440-500
X X X X X
*
: External filter (P/N: SPF-1) is required in the United States with the 24dBi grid
antenna to comply with FCC spurious emission requirements. Install this between
the amplifier and the antenna.