User's Manual

Basic Installation
BreezeNET PRO.11 Series 2-4 User’s Guide
• Plug the output jack of the power transformer into the DC input socket
on the unit. This socket may be located on the rear or side panel of the
unit.
• Connect the supplied power transformer to a power outlet -
110/ 220VAC.
2.5. Connect the Unit to the Ethernet Port
• Connect one end of a an Ethernet 10BaseT cable (not supplied) to the
RJ-45 port on the rear panel of the unit (marked UTP).
• Connect the other end of the connector cable to the Ethernet outlet:
• When connecting an SA-10 or SA-40 to a PC, use a straight cable.
• When connecting an AP-10 or WB-10 to a LAN, use a straight
cable.
• When connecting an AP-10 or WB-10 to a PC, use a crossed cable.
• When connecting an AP-10 to a WB-10, use a crossed cable.