User's Manual

Basic Installation
BreezeNET PRO.11 Series 2-6 User’s Guide
2.6.2. Access Point LEDs
Name Description Functionality
PWR power supply On – After successful power up
Off – Power off
INFR radio interference Off – No interference
Blinking – Interference Present
ETHR Ethernet activity On – Reception of data from Ethernet LAN that is forwarded to
WLAN (in reject unknown mode)
Off – No reception of data from Ethernet LAN that is forwarded
to WLAN
LOAD WLAN load
Number of associated stations
no stations
1-8 stations
9-16 stations
17 or more stations
2.6.3. Verifying the Ethernet Connection
Once you have connected the unit to an Ethernet outlet, verify that the
ETHR LED on the front panel is blinking. The ETHR LED should blink
whenever the unit receives LAN traffic.
At the other end of the Ethernet link, verify that the LINK indicator is ON.
For APs the LINK indicator is located on the attached hub port, and for
Station Adapters the LINK indicator is located on the NIC.