User's Manual

Device Setup and Management
BreezeNET PRO.11 Series 3-12 User’s Guide
station must have the same keys (values).
• Preauthentication – During the authentication process the AP is
notifying the other AP’s connected to the Ethernet backbone to
preauthenticate the station that has been authenticated to this AP. It
is recommended to use this feature when there is plenty of roaming
between the AP’s. Preauthentication must be activated on both the
AP’s and the Station.
• WEP Key#1-4 – These 4 Access Keys must be configured before they
can be used. In this screen you may enter the encryption key. The key
is made of 10 Hex (0-9,A-F) characters. In order to change the unit to
work in shared key authentication all four keys must be entered.
Entering zeros (0000000000) which is the default for this parameter
will cause the unit to work in open system authentication.
3.5. Advanced Settings Menu
BreezeNET PRO.11 Series (SA-10)
Version : 4.3.10
Date: 15 Feb 1999 23:49:56
Advanced menu
================
1 – Translation Mode
2 – Roaming
3 – Performance
4 – Radio
5 – Rate
6 - AP Redundancy Support
7 – Maintenance
Select option >
Figure 3.3: Advanced Settings Menu
The following sections describe the important parameters and relevant
information in the Advanced Settings Menu. All menu options can be
viewed by the Installer; However, the modification of certain parameters
from this menu, require the Technician access rights level.