User's Manual

Device Setup and Management
BreezeNET PRO.11 Series 3-17 User’s Guide
Card) card that the station is connected to through the Ethernet UTP port
(usually the Ethernet card of the PC). The station uses the Association
Address as its identification in the Wireless Cell (WLAN address).
When a station is first connected to an ethernet port, it waits for the
Association Address update over the Ethernet. You can also have the
device use its own MAC address (Use Mine) for testing purposes, in
which case there will not be a proper network connection.
3.6. Site Survey Menu
BreezeNET PRO.11 Series (SA-10)
Version : 4.3.10
Date: 15 Feb 1999 23:49:56
Site Survey menu
================
1 - System Counters
2 - Survey Software
3 – Event Log
4 – Display Neighboring AP’s
Select option >
Figure 3.4: Site Survey Menu
The Site Survey Menu gives access to the sub-menus necessary to perform a
Site Survey that helps you position your units and align their antennas, as
well as perform troubleshooting.
The following sections first describe the sub-menus in the Site Survey
menu, and then explain step-by-step how to perform a Site Survey. The Site
Survey menu contains four sub-menus:
• System Counters
• Survey Software
• Event Log
• Display Neighboring AP’s